Environment
Operating: Temperature 5～40℃ Humidity = 80%
Storage: Temperature -20～55℃ Humidity = 93%
Power
DC: Built-in rechargeable battery, 2 hours working time
AC : 85-260V 50/60Hz ±0%
Display
8.4″ TFT, 800*600
Maximum 7 waveforms in full screen
Power/standby indicator and battery indicator
Battery
Rechargeable 12V Acid battery
Regular working time above 2 hours
Lasting 5 minutes after first alarm of low battery
Recorder
Built-in, thermal array
Recording mode: manual, alarm and timing
Parameter alarm recording
Waveform freeze recording
Trend list/graph recording
Alarm event review recording
NIBP review recording
Monitor information recording
Recall
Trend recall: 72hours, I-minute resolution
Alarm event recall: all parameters
NIBP measurement recall: .1400 NIBP measurement data
EGC
Displaying graphics of 7 leads on the same screen
Overload protection: Defibrillation.
Anti the interference of high-frequency electrotome
Lead: 5 leads (RA, LA, V, RL, LL)
Lead Selection: I; II; III; avR; avL; avF; V;
Waveform: 7 channels
Gain Selection: ×0. 5; ×1; ×2; ×4
Electrical Leakage : < 30uA
Baseline Recovery Time: <3 sec following defibrillation
Protection: separates and withstands, 4000V AC/50Hz
defibrillation,resistent to interference of
electrotonus and myoelectricity
Scan Speed: 12.5mm/25mm/50mm/sec
Lead Drop: auto detection
Modes: DIA: 0.05～100Hz
MON: 0.5～35Hz
OPE: 1～25Hz
RESP
Model: RA-LL impedance
Measurement /alarm range:199 rpm
Resolution: 1rpm.
Accuracy: ±2rpm.
NIBP
Unique Direct, Reverse and Quick modes
Method: automatic oscillometric
Working Mode: Auto/Manual
Interval of Auto Mode: 1-60 min
PR Range: 0-300 bpm
Measurement Unit: mmHg/Kpa Selectable
Measurement Ranges: Systolic BP,
Diastolic BP and Mean BP
Applicability: Adult/Pediatric/Neonatal
Overload protection: Dual security protection
SpO
SpOprobe of high intensity and durability 2
Excellent measurement of low perfusion.
Anti interference of movement
Measurement Range: 0-100%
Alarm range: 0-100%
Resolution: ±1%
Accuracy: ±2% (80-100%)
±3% (60-79%)
PR range: 0～300bpm
HR
A. Measurement Range: 0-300bpm
B. Accuracy: ±1bpm or ±2%
C. Resolution: 1bpm
D. ECG Calibration: 1mV (Peak Value)
ST Segment offset (Diagnose Mode)
A. Measurement Range: -0.8mV～2.0mV
B. Accuracy: ±0.02mV or ±5%
TEMP
Resolution: 0.1 degrees Celsius
Accuracy: ±0.2 degrees Celsius
Channel: 1 channel
Average measurement Time: < 10sec
Alarm: Sound, light
Standard Configuration: ECG + RESP + NIBP + SpO 2
+ HR(PR) +TEMP
+ Built-in Battery
Optional Equipment: EtCo2, Single/Dual IBP, Builtin thermal recorder |
